50X Aluminum Solution Welding Flux-Cored Rods Wire Brazing Rod 33cm* 1.6MM

Description

Product Description
Product description:
Aluminum welding rod is pure aluminum welding wire with aluminum content greater than 99.7%. It is a universal welding material with a wide range of uses.
Excellent welding effect-due to the internal powder, it has a sufficient and smooth welding effect. Low melting point (380°~400°), strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity, and excellent processing performance.
No solder powder needed-you don't need to use other flux powders that use aluminum alloy as the flux, but use the salt base as the coating. Very convenient and easy to solder.
Wide service life-suitable for welding or surfacing welding of alloys with high strength, good forgeability and corrosion resistance.
It has a wide range of uses-mainly used for argon arc welding and filling materials of pure aluminum, and for connection with aluminum bus bars and guide rods in electrolytic aluminum plants, as well as electricity, chemicals, food, etc.
Light weight and small size-size is 330*1.6mm, weight is 3.5g, very easy to bend and carry.
Specifications:
Quantity: 50PCS
Material: Aluminum
Color: silver
Melting point: 380°~400°
Diameter: 1.6mm / 2.0mm
Length: 33cm / 1.08ft
Weight: about 3.5g / 0.12in (a piece of aluminum welding wire)
Recommended for welding or brazing aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
Instructions:
Step 1: Clean and polish the physical surface.
Step 2: Heat the surface of the substrate until the temperature of the welding wire reaches the working temperature of 380°C~400°C. Therefore, the heat transfer welding wire of the parent metal can be used to form the weld. Flame should not be used when the surface temperature of the base metal is high enough. It flows well and penetrates into the metal capillary.
Step 3: When repairing thin aluminum, as long as the aluminum-based metal is heated to a suitable working temperature, then the steel wire is used to frictionally melt back and forth to form a weld. Only the wire melted with a metal brush can be welded at the weld.
Step 4: Use propane gas to weld objects, use industrial gas or induction heating device to heat and weld large objects, and cool down naturally after welding.
Life application:
Can be used for a variety of heat sources, such as propane, oxyacetylene, etc. Low-temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum, cast aluminum, aluminum alloy and the dissimilar welding between the above metals, even the white metal that is severely corroded or oily, and even the aluminum alloy that cannot be repaired can be repaired. It is suitable for omni-directional welding by primary welding operators. Only a small heating device is required. The welding strength after welding is generally higher than the strength of the base metal itself, and the gas welding operation can be understood.
Note:
1. The metal surface must be clean.
2. The temperature of the base metal should reach 400°C, including the temperature of the base metal during the welding process, which should be kept at 400°C, and the temperature can be high or low.
Package list:
50*Aluminum welding wire (50PCS)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
On Feb-07-21 at 01:56:11 PST, seller added the following information:
On Mar-30-21 at 08:28:06 PDT, seller added the following information:
On May-10-21 at 21:34:05 PDT, seller added the following information:
On May-25-21 at 05:56:09 PDT, seller added the following information:
On Jun-14-21 at 13:00:19 PDT, seller added the following information: